AttendBio Research

Marcas representadas
Kisker Berthold DS Titertek USBio Biontex ProSpec
Genecraft Biothema EuroBioSciences Biosera Genelink ID Labs

DNA workstation y material para hibridación

Campanas para DNA y PCR (DNA workstation)


DNA-Workstation I
The DNA-Workstation is an UV sterilisation cabinet to decontaminate reagents and equipment prior to carrying out PCR reactions. The powerful 15 watt UV light (254 nm) of the DNA-Workstation denatures nucleic acids in 5-30 minutes making them unsuitable for amplification and therefore eliminating any possible cross contamination. The DNA-Workstations are equipped with a white lamp for illumination. The 10 mm acrylic walls or 8 - 10 mm glass walls also acts as an efficient shield of beta-radioactive emissions. The DNA-Workstations stand on an easy to clean stainless steel tray.

Available models:

L020C: acryl side walls, 1 x 15 watt UV-lamp (254 nm), 1 x 15 watt white light lamp and 1 x UV/Air cleaner (254 nm), which circulates the air along the UV-lamp for continues denaturation, lower part front to turn up.
Dimensions: 69 x 51 x 57 cm (WxDxH)
Weight: 25 kg

L020-GC: glass sides, which are resistant to UV-cracking and can be cleaned with the medium of choice, equipped with 1 x 15 watt UV-lamp (254 nm), 1x 15 watt white light lamp and 1 x UV/Air cleaner (254 nm).
Dimensions: 69 x 51 x 57 cm (WxDxH)
Weight: 35 kg
Cat. # Description Power
L020-C DNA-Workstation, Acryl with UV/Air-Cleaner 220Volt/50Hz
L020-GC DNA-Workstation, Glass with UV/Air Cleaner 220Volt/50Hz
 
DNA-Workstation I-XL
This XL-version of the workstation shows the same advantages like DNA-workstation I.
In comparison with the standard version the XL-version provides a working area of 120 x 52 cm and 3 electrical socket for the use of further laboratory equipment inside the workstation.

L020-XL-GC:
The base of the front-screen can be locked in 3 positions
2 x 30 watt UV-lamp (254 nm)
1 x 30 watt whitelight lamp
1 x 30 watt UV/Air-Cleaner (254 nm)
Dimensions: 124,5 x 58 x 58,5 cm (BxTxH)
Weight: 58 kg
Cat. # Description Power
L020-XL-GC DNA-Workstation, Glass with UV/Air Cleaner 220Volt/50Hz
 
UV-Cleaner, the new combination of Laminar Flow and UV-light for Clean Rooms
This UV-Cleaner provides DNA-fragment-free laboratories without direct UV-light. The air is constantly flowing through the instrument, which is equipped with a fan, an UV-lamp and a dust filter. Inside the box the density of the UV-light is increased 1000 fold, sufficient to inactivate DNA complete. Also microbiological contaminations are reduced strongly.
The UV-Laminar-Flow is able to clean 25 m3 of air/ hour to provide DNA free laboratory of 25 m3 within 3 hours.

Further advantages:
  • no HEPA-filters to change
  • ozon-free high density UV decontamination
  • noise free, low energy consumption
  • long living UV-lamps (8.000 hr)
  • compact for wall fixation



  • The instrument is recommended for clean room laboratories as PCR, DNA-Analysis, Microbiology, Virology, Tissue Culture or other rooms, where a contamination free area is needed. After 12 hours of air cleaning, the UV-Laminar Flow provides an estimated reduction of the colony forming unit to 80 - 100 CFU/m3 air
    the cleaner can be mounted on the wall or a stand is available optional

    L046-M
    weight: 4 kg, dimensions 82 x 92 x 600 mm
    power 220/240 volt, 50/60Hz, 30 watt.
    Cat. # Description Capacity/hr
    L046-M UV-Cleaner 25m3
    L046-ST Stand for Cleaner
     
    DNA-Workstation II
    This DNA-Workstation avoids cross-contamination by suction of the air and ducting it through an activated charcoal filter. All particles are captured and will not reach normal lab air.
    The DNA-Workstation is equipped with an UV-lamp (254 nm) and filtercassette. The hour-counter shows the overall working time. The activated charcoal filter should be replaced every 1000 working hours. The work surface is made from stainless steel and easy to clean. The airflow is adjustable from 0 - 100%. The DNA-Workstation is available in 3 versions. The perspex cover can be moved 100mm backwards (exept USA version).

    Specification:
  • electr. power: 220volt/50Hz/80watt
  • Dimensions of working space: 470 x 300mm (WxD)
  • suction space: 410 x 240mm (WxD)/
  • Exterior dimensions Standard-version: 485 x 540 x 250mm (WxDxH)
  • Sydney-version: 485 x 540 x 465mm (WxDxH)
  • USA-version : 485 x 540 x 600mm (WxDxH)
  • Cat. # Description
    L016 DNA-Workstation (Standard)
    L016-SY DNA-Workstation (Sydney)
    L016-US DNA-Workstation (USA)
    L016-AF act.charcoal filter
    L016- UV UV-lamp

     

    Para informarse de disponibilidad y precio, contacte con nosotros.

    Crosslinker

     

    BIO-LINK-Crosslinker
    BIO-LINK 254 nm provides a fast and reliable method, to fix DNA or RNA onto nylon- or nitrocellulose membranes. The crosslinking requires only a few seconds for a stable fixation between DNA/RNA and the membran. This method avoids a loss of samples through later hybridisation. The signal intensity is manifold increased (5 - 10 times) compared to the traditional and time consuming baking method (two hours at 80°C ). The BIO-LINK is equipped with five tubes of 8 Watt and also available in 312 nm and 365 nm. The big volume chamber (14,5 x 33,0 x 26 cm / HxDxW) offers space for bigger tubes and plates.
    UV-energy supply can be set precise. BIO-LINK is equipped with an UV-energy programming system with a time integrator, which constantly monitors the UV-light emission.

    Further technical details:
  • 9 presetted energy-/time programs or manual configuration
  • max. UV-exposition in two ranges:0,025 - 9,999 joules and 0-99,99 joules
  • high reproducability by UV-sensors
  • large, user friendly keybord with LED-display
  • internal safety interlock
  • timer up to 999,9 minutes
  • Dimensions: 30,5 x 36 x 35 cm (HxDxW), weight: 10,5 kg


  • In addition to the crosslinking of nucleic acids BIO-LINK can be used for:
  • "Nicking" of DNA in agarose-geles
  • partial restriction endonuclease digestion by formation of thymine dimers
  • Rec-A mutation-screening
  • elimination of PCR-contamination

  • Cat. # Description
    BLX-254 BIO-LINK 254 nm
    BLX-312 BIO-LINK 312 nm
    BLX-365 BIO-LINK 365 nm

     

    Membrana de nitrocelulosa

     

    Nitrocellulose-Membrane
    Membrane of 100% pure nitrocellulose for transfer of proteins and nucleic acids. It shows high binding capacity (80 - 100 µg / cm2) and a low background. Pore size 0,45 µm is used for standard applications. The 0,2 µm pore size is recommended for transfer of low molecular weight proteins (< 20 kDa) and nucleic acids to avoid loss of sample during transfer.
    Cat. # Description Size Pack size
    MNC-0.2 Nitrocellulose-Membran 0,2µ 33 x 300 cm 1 Roll
    MNC-0.4 Nitrocellulose-Membran 0,45µ 33 x 300 cm 1 Roll
    MBP-0.17 Blotting-Paper 0,17 mm 46 x 57 cm 100 sheets
    MBP-0.34 Blotting-Paper 0,34 mm 46 x 57 cm 100 sheets

     

    Hornos de hibridación

     

    Incubator and Hybridisation oven
    The incubator is a compact bench-top unit, which is available in different configurationes. It can be supplied as incubationofen with and without rotisserie or rockingplatform. A large usable space and a big LED Display garantees easy setting and reading of the microprocessor controlled temperature and speed. A key switch is used to select rotisserie or shaking mode at the combination version L018-HY-RK.

    Specificationes:
    temperature range RT - 80°C, temerature accuracy 0,2°C
    speed rotisserie 5 - 100 rpm
    speed rocking platform 5-100 rpm
    speed orbital shakingplatform 5-200 rpm
    speed Vortexer 5-1.500 rpm
    dimensions of platformen 200 x 270 mm
    inner dimensions 340 x 260 x 250 mm, overall dimensions 360 x 440 x 430 mm, weight 25,0 kg
    Cat. # Description
    L018 Incubator
    L018-RK Incubator with rocker-platform
    L018-OS Incubator with Orbital-platform
    L018-VS Incubator with Vortex für micro/deep well plates
    L018-HY Hybridisation ofen with 1 rotissery selected from below
    L018-HY-RK Hybridisation ofen with rotissery and rockingplatform
    L018-8R rotissery for 8 tubes of 35-40 mm diameter
    L018-16R rotissery for 16 x 50 ml tubes, conical
    L018-24R rotissery for 24 x 15 ml tubes, conical

     

    Para informarse de disponibilidad y precio, contacte con nosotros.

    Documentación de geles

     

    Digi-Image, Geldocumentation-System
    Digi-Image Geldocumentation-System is a compact "Low-Budget"-System, which works without the need of a space consuming PC in the laboratory. The digital 8 megapixel camera offers excellent resolution. Pictures are viewed direct through a 8" TFT colour monitor. If necessary, pictures can be stored on a memory card (1 GB included with multicard-reader) to transfer data to a PC for further analysis. If purchased with the corresponding UV-Transilluminator (cat.# DG-UV-20M) the safety switch turn off the transilluminator when the door is opened. Also the internal light is activated for convenient gel manipulation. A thermoprinter is also available.

    Digi-Imagesystem:
    Specifications dark hood
    Dimensions: 29 x 22 x 32 cm (B x T x H)
    8"TFT-colour monitor (resolution: 640 x 480 pixel)
    Multi power source for camera, whitelight and monitor
    video- u.audio-input

    Specifications camera:
    8-megapixel
    resolution: 640 x 480 to 3.264 x 2.448 pixel
    8-fold optical zoom 8,9 - 71,2 mm
    Autofocus: TTL (Contract-detect through-the-lens)

    Digi-Imagesystem also available with UV-transilluminator (DG-S_UV)

    Specifications UV-transilluminator (312 nm):
    filter: 21x 21 cm (EtBr), High/Low-intensity-switch
    UV-protection shield: 330 x 250 mm
    overall dimensions: 340 x 295 x 100 mm, weight: 7,5 kg
    Cat. # Description
    DG-S Image-System inclusive 8-megapixel digital camera, 8\" TFT colour monitor, camera hood and EtBr-Filter
    DG-S-UV Image-System inclusive 8-megapixel digital camera, 8\" TFT colour monitor, camera hood and UV-transilluminator (312 nm)
    DG-UV-20M UV-transilluminator (312 nm), 20 x 20 cm (EtBr), dual intensity with UV-protection shield
    DG-S/TP s/w Thermoprinter Mitsubishi, P93-E
    DG-EBF Filter (55 mm) -Ethidiumbromide for the camera
    DG-SYF Filter - SYBR® -Green for the camera
    DG-K61B Thermopaper Quality Standard, width: 110 mm, length: 21 m, VE = 4 rolls
    DG-K65HM Thermopaper Quality \"High Density\" width: 110 mm, length: 21 m, VE = 4 rolls
     
    Flexi, Geldocumentation-System
    This Flexi 5000 geldocumentation-System is based on a digital-camera with is fully PC-controlled by the software Argus X1. It´s a extremly user friendly system with all advantages of a digital-camera - for example the high image resolution. For the administration of the data amounts it contains a integrated data base.

    Basic package Flexi 5000: Digital-camera, close-up lense, filter (EtBr or SyBr Green), controlling cable, controlling software Argus X1

    Dark hood UDH-10
    UV-transilluminator
    either UTR-20M (312 nm) or UTR-20L (365 nm).

    Specifications camera:
    Chip: CCD-Chip
    Resolution: 5 mio. pixel
    Greyscale: 8 bit (256)
    Colours: 24 Bit (16,7E6)
    Zoomobjektive: motor zoom
    max. integration time: 10 sec.

    Specifications dark hood:
    Set-top dark hood UDH-10
    stand area (W x L) 30 cm x 25 cm

    Specifications UV-transilluminator:
    optionally UTR-20M (312 nm) or UTR-20L (365 nm)
    filter-size: 20 x 20 cm
    6 tubes with each 8 Watt

    Basic package Flexi 5000-S:
    Digital-camera, close-up-lense, filter (EtBr or SyBr Green), controlling cable, controlling software Argus X1

    Optionally there will be offered a thermoprinter for both systems.
    Cat. # Description
    Flexi 5000 Image-System Flexi incl. digital-camera with controlling software Argus X1, set-top dark hood UDH-10 and UV-transilluminator UTR-20M or UTR-20L
    Flexi 5000-S Image-System Flexi incl. Digital-camera with controlling software Argus X1
    Flexi 5000-TP s/w Thermoprinter Mitsubishi, P93-DW

     

    Transiluminadores UV

     

    UV - Transilluminators
    homogenous lightning by 6, 8 or 12 Tubes (depending on model), long tube shelflife through integrated cooling fan, electronical start, models with stepless choosable intensity of the tubes (10-100%), UV-protection shield (optional) usable angle 0-90°, high quality construction in compact design,

    The listed illuminators are useful for following dyes:
    254 nm Hoechst Blue, Radiant Red, Chemiefluoreszenz
    312 nm Ethidiumbromid, SYBR Orange, Fluorescein,Texas Red, SYBR Red
    365 nm SYBR Green, GFP, CHO, Hoechst 33258,Fluorescamine, EBFP
    Bluelight Gel Star, SYBR Green, SBBR Gold, AttoPhos,PicoGreen, NBD, Acridine Orange, EGFP
    Whitelight Coomassie Blue, Silver Stain, Film Imaging
    Accessories: UV-protection shield, replacement tubes and glases, UV-protection glas and face shield
     
    Transilluminators
    Cat. # Wavelength Number tubes x Watt Filter size Intensity control
    UTR-20S 254 8 x 8 20x20 50 or 100%
    UTR-20M 312 6 x 8 20x20 none
    UTR-20L 365 6 x 8 20x20 none
    UTR-30S 254 12 x 8 23x30 50 or 100%
    UTR-30M 312 8 x 8 23x30 none
    UTR-30L 365 8 x 8 23x30 none
    UTR-40S 254 6 x 15 20x40 50 or 100%
    UTR-40M 312 6 x 15 20x40 50 or 100%
    UTR-40L 365 6 x 15 20x40 50 or 100%
    UTR-20S-V 254 8 x 8 20x20 10-100%
    UTR-20M-V 312 8 x 8 20x20 10-100%
    UTR-20L-V 365 8 x 8 20x20 10-100%
    UTR-30S-V 254 12 x 8 23x30 10-100%
    UTR-30M-V 312 12 x 8 23x30 10-100%
    UTR-30L-V 365 12 x 8 23x30 10-100%
    UTR-40S-V 254 6 x 15 20x40 10-100%
    UTR-40M-V 312 6 x 15 20x40 10-100%
    UTR-40L-V 365 6 x 15 20x40 10-100%
    UTR-20S/M 254/312 4 x 8 / 4 x 8 20x20 50 or 100%
    UTR-20S/L 254/365 4 x 8 / 4 x 8 20x20 50 or 100%
    UTR-20M/L 312/365 4 x 8 / 4 x 8 20x20 50 or 100%
    UTR-30S/M 254/312 6 x 8 / 6 x 8 23x30 50 or 100%
    UTR-30S/L 254/365 6 x 8 / 6 x 8 23x30 50 or 100%
    UTR-30M/L 312/365 6 x 8 / 6 x 8 23x30 50 or 100%
    UTR-40S/M 254/312 3x15 / 3 x15 20x40 50 or 100%
    UTR-40S/L 254/365 3x15 / 3 x15 20x40 50 or 100%
    UTR-40M/L 312/365 3x15 / 3 x15 20x40 50 or 100%
    UTR-20S/WL 254/whitelight 6 x 8 UV / 2 x 8 WL 20x20 none
    UTR-20M/WL 312/whitelight 6 x 8 UV / 2 x 8 WL 20x20 none
    UTR-20L/WL 365/whitelight 6 x 8 UV / 2 x 8 WL 20x20 none
    WL-20 whitelight 8 x 8 20x20 none
    WL-30 whitelight 12 x 8 23x30 none
    BLT-20 Bluelight, LED-Matrix 225 20x20 50 or 100%
    BLT-30 Bluelight, LED-Matrix 3508 23x30 50 or 100%
     
    Accessories
    Cat. # Description
    UVT-UVS UV-protectionshield
    UVB-mB UV-glasses with ear piece
    UVB-mG UV-glasses with rubber band
    UV-VG UV-face shield
     
    UV-Lamps
    We offer with this productline UV-lamps in different wavelengths. The well designed lamps are easy to handle and reliable.
    A special cost effective product are the lamps in combination of two different wavelengths.

    UV-lamps are recommended to use according to the wavelengths in following application areas

    254 nm: Elimination of PCR-contaminations, fluorochemistry, pesticide analysis, mutation studies, mykology, toxikology, mineralogy, polymer curing and control in industry
    The high intensity lamp UVL-100 is supplied with a separate power supply and is especially used for mutation studies and polymer curing.

    312 nm: DNA and RNA-electrophoresis, recognition of lanes in the gel.

    365 nm: cultivation of fungi, identification of bacteria, fluorochemistry, pesticide analysis, quality controle, food contamination, archeology and mineralogy.
    Cat. # Wavelength Number of Tubes x Watt Dimensionen in mm WxDxH µW/CM
    UVL-4S 254 1 x 4 199 x 85 x 60 340
    UVL-4L 365 1 x 4 199 x 85 x 60 400
    UVL-4LS UVL-4LS 2 x 4 199 x 85 x 60 350/265
    UVL-6S 254 1 x 6 276 x 85 x 60 710
    UVL-6M 312 1 x 6 276 x 85 x 60 680
    UVL-6L 365 1 x 6 276 x 85 x 60 700
    UVL-6LS 365/254 2 x 6 276 x 85 x 60 610/400
    UVL-6LM 365/312 2 x 6 276 x 85 x 60 610/580
    UVL-6MS 312/254 2 x 6 276 x 85 x 60 580/400
    UVL-8S 254 1 x 8 351 x 85 x 60 820
    UVL-8M 312 1 x 8 351 x 85 x 60 790
    UVL-8L 365 1 x 8 351 x 85 x 60 800
    UVL-8LS 365/254 2 x 8 351 x 85 x 60 720/520
    UVL-8LM 365/312 2 x 8 351 x 85 x 60 720/660
    UVL-8MS 312/254 2 x 8 351 x 85 x 60 660/520
    UVL-115S 254 1 x 15 505 x 140 x 117 1.000
    UVL-115M 312 1 x 15 505 x 140 x 117 1.000
    UVL-115L 365 1 x 15 505 x 140 x 117 1.100
    UVL-215S 254 2 x 15 505 x 140 x 117 1.780
    UVL-215M 312 2 x 15 505 x 140 x 117 3.000
    UVL-215L 365 2 x 15 505 x 140 x 117 2.300
    UVL-215LS 365/254 2 x 15 505 x 140 x 117 1.350/1.100
    UVL-215LM 365/312 2 x 15 505 x 140 x 117 1.350/1.800
    UVL-215MS 312/254 2 x 15 505 x 140 x 117 1.800/930
    UVL-100 254 1 x 100 404 x 98 x 197 3.400
     
    Accessoires for UV-Lamps
    Cat. # Description
    USVL-30 Stand for UVL-115 and UVL-215
    USVL-6 Stand for 4 / 6 / 8 watt UV-lamps
    USMA HHandle for 4 / 6 / 8 watt UV-lamps
    USMU Bracket for 4 / 6 / 8 watt UV-lamps

    Para informarse de disponibilidad y precio, contacte con nosotros.

     

     

     

    © AttendBio Research S.L. 2012

    Diseño: webessencial.com